Hoist Protective Covers

| Katherine Marr

    Hoist Protective Covers Made from heavy duty canvas, hoist protective covers are ideal to prevent contamination or as insulation when welding. Smart design allows full operation and inspection of critical hoist parts. Hoist and Overspeed covers sold separately under the following part numbers: 830311B BISOMAC Motor Cover, Blue 830312B BISOMAC Overspeed Cover, Blue […]

Read More »

Remote Control (Pendant)

| Katherine Marr

Remote Control This Single Hoist Remote Control has been specially designed to meet tough outdoor conditions. The enclosure and switches meet NEMA IP65 water resistance ratings, but were actually tested according to IP67 ratings. We did a temporary submersion test in a 3.3 ft column of water and no leakage was detected. In addition, we […]

Read More »

Beta Max Leo XXL VFD

| Katherine Marr

Beta Max Leo XXL VFD Unmatched variable frequency drive technology. Wireless Controls ensure precise placement of material. Soft Start / Stop function protects payloads. Engineered to outperform and outlast any hoist at any height. Features:  Single Line Setup Lifting Height: 400 ft Lifting Capacity: 1,000 lb Lifting Speed: 80 fpm Double Line Setup Lifting Height: 200 ft Lifting Capacity: 2,000 […]

Read More »

Beta Max Leo XXL

| Katherine Marr

Beta Max Leo XXL Engineered for taller projects. Safely and efficiently lifts 1,000 lbs at 80 fpm up to 400 ft in one run. For heavier loads, quickly switch to a double line setup and lift up to 2,000 lbs.​ Features: Single Line Setup Lifting Height: 400 ft Lifting Capacity: 1,000 lb Lifting Speed: 80 fpm Double Line […]

Read More »

Beta Max Leo

| Katherine Marr

Beta Max Leo Lifts 2,000 lbs. quickly and safely, at speeds up to 80 ft. per minute. Features: Single Line Setup Lifting Capacity: 1000 lb Lifting Speed: 80 fpm Lifting Height: 220 ft Double Line Setup Lifting Capacity: 2000 lb Lifting Speed: 40 fpm Lifting Height: 110 ft Power: 1Φ 220V Unit Weight: 165 lb Product Number: 50-40 Leo – Leo XXL Spec Sheet […]

Read More »

Beta Max Gemini Plus

| Katherine Marr

Beta Max Gemini Plus Lifts 1200 lbs. with  110V power. Perfect for medium duty projects. The Gemini can be single or double roped for scaffold, masonry, stucco, general construction, restoration or roofing needs. Features: Single Line Setup Lifting Capacity: 600 lb Lifting Speed: 80 fpm Lifting Height: 220 ft   Double Line Setup Lifting Capacity: 1200 lb Lifting Speed: 40 […]

Read More »

Material Hoist Kit

| Katherine Marr

    Material Hoist Kit Turn your 5×5 Rolling Outrigger Beam into a material hoisting or rescue rig. Simply mount this kit to the 5×5 beam and bolt a Bisomac or similar traction hoist to the rear bracket. An optional wire winder can be installed to neatly collect the wire rope. Load Capacity: 1500 lb […]

Read More »

tirak® Standard Man-Riding X-Series Air Hoist – 1,000 lbs.

| Katherine Marr

tirak® Standard Man-Riding X-Series Air Hoist – 1,000 lbs. Capacity In some applications using compressed air is the best way to drive a tirak®. Wherever the installation does not allow the use of electrical power or where compressed air is easily available, the air-powered tirak® hoists are the best solution. The working principle of the tirak® remains […]

Read More »

TIRAK® Standard Man-Riding – X-Series Electric Hoist – 1,000 lbs.

| Katherine Marr

tirak® Standard Man-Riding – X-Series Electric Hoist – 1,000 lbs. Capacity The tirak® hoists of our X-series are the standard, high performance, lightweight models for all man-riding applications. The X-series cover a wide range of usable workload of up to 4,400 lbs and even up to 5,300 lbs for air-powered hoists. The X-series uses a […]

Read More »

BISOMAC210-1000A Air Hoist

| Katherine Marr

    Bisomac210-1000A Air Hoist Pneumatic Traction Hoist  4 hp Ingersoll Rand Motor 750-1500 lb load capacity 65 to 110 psi depending on load capacity desired 40 to 60 cfm Motor Air Consumption 5/16 (8 mm) Wire Rope Diameter Bisomac210 Air Hoist Operating Manual

Read More »