Rigging Plate, 5×5
Rigging Plate, 5×5 Sliding steel suspension plate. Make sure to provide an end stop.
Hanger Strap Assembly, 5×5
Hanger Strap Assembly, 5×5 Friction mounted wire rope suspension bracket that will stay in a fixed position once tightened.
Tie Back Anchor
Tie Back Anchor Tie back/Safety line anchors for both permanent and temporary installations.
Down Under Beam
Down Under Beam The down-under beam will reach 3’ under nonstructural overhands like cornices and mansard roofs.
Beam Trolley
Beam Trolley 5” l-beam Trolley can only be used on 5×5 or 8×5 l-beams. 1,500 lb load capacity. Approved for use with single safety line. Beam Trolley Spec Sheet
Wire Rope, 5×26
Wire Rope, 5×26 CLIMB-ME wire rope is a high-performance, long-life wire rope, specifically designed for temporary and permanent suspended scaffolding. Can be used in any brand traction hoist that specifies 5×26 PC type wire rope. Various spool lengths are available: 1000 ft, 2500 ft, and 5000 ft. Wire Rope Spec Sheet
Tripod Stand
Tripod Stand The Tripod Stand is a simple and lightweight solution for rigging through roof holes. Examples include core drilled concrete holes, steel grated decks, etc. Load Capacity: 1,500 lbs. for suspended scaffolding (incl. 4 to 1 safety factor). 5,000 lbs. for terminating lifelines. Dimensions: 19x16x18 in. (HxDxW) Weight: 21 lbs. Construct on: Steel Finish: Grey Powder Coat or Galvanized Tripod Stand […]
Pigeon Hole
Pigeon Hole The Pigeon Hole Stand is designed to suspend powered scaffolding or safety lines through existing or core drilled holes (3” max. diameter) in a concrete or steel structure. Load Capacity: 1500 lbs. rated load, incl. 4:1 safety factor Dimensions: 18.25x12x12 in. (HxDxW) Weight: 22 lb Construct on: Steel Finish: Galvanized or powder coated Pigeon Hole Spec Sheet